Search Inventory
Vanguard / SMTCL >
Conventional Equipment >
Manual Oil Country Lathes
The Vanguard S1 hollow spindle lathes are designed to meet the demanding requirements of today's oil industry. They are used primarily for machining and threading the ends of oil country tubulars, like drill pipe and casing connectors. These lathes feature a wide range of inch, metric, module, and diametral thread pitches to meet the needs of the energy industry. They are also used for turning external cylindrical surfaces, boring, or machining taper holes. They feature a large spindle bore with front and rear mounted power scroll chucks to accomodate large pieces of pipe. The bed is a single piece, high-grade alloy casting for rigidity and stability. The extra wide bed is fully supported to the floor and features replacable, hardened and precision ground steel ways. These lathes are designed for maximum performance in heavy production operations.
Manual Oil Country Lathes
The Vanguard S1 hollow spindle lathes are designed to meet the demanding requirements of today's oil industry. They are used primarily for machining and threading the ends of oil country tubulars, like drill pipe and casing connectors. These lathes feature a wide range of inch, metric, module, and diametral thread pitches to meet the needs of the energy industry. They are also used for turning external cylindrical surfaces, boring, or machining taper holes. They feature a large spindle bore with front and rear mounted power scroll chucks to accomodate large pieces of pipe. The bed is a single piece, high-grade alloy casting for rigidity and stability. The extra wide bed is fully supported to the floor and features replacable, hardened and precision ground steel ways. These lathes are designed for maximum performance in heavy production operations.
Swing Over Bed: 35"
Swing Over Cross Slide: 24"
Spindle Center to Floor: 45"
Distance Between Centers: 39" / 59" / 118"
Max Turning Length: 118"
Bed Width: 27.75"
Spindle Bore and Nose: 14" / A1-20
Spindle Speeds: (12) 7 - 305 rpm
Spindle Motor: 25 hp
Compound Slide Swivel Angle: 90 degrees
Cross Slide Travel: 12"
Compound Slide Travel: 8"
Cross Slide Width: 13"
Taper Attachment Angle: 14 degrees
Inch Threads: (26) 0.5 - 28 tpi
Metric Threads: (22) 1 - 15 mm
Module Threads: (21) 0.5 - 7.5
Diametral Threads: (20) 2 - 28 tpi
Longitudinal Threads: (32) 0.003 - 0.56 ipr
Cross Feeds: (32) 0.003 - 0.56 ipr
Leadscrew Diameter - Pitch: 2.2" - 2 tpi
Longitudinal Rapid Traverse: 157 ipm
Machine Weight: 24,640 lbs
Swing Over Cross Slide: 24"
Spindle Center to Floor: 45"
Distance Between Centers: 39" / 59" / 118"
Max Turning Length: 118"
Bed Width: 27.75"
Spindle Bore and Nose: 14" / A1-20
Spindle Speeds: (12) 7 - 305 rpm
Spindle Motor: 25 hp
Compound Slide Swivel Angle: 90 degrees
Cross Slide Travel: 12"
Compound Slide Travel: 8"
Cross Slide Width: 13"
Taper Attachment Angle: 14 degrees
Inch Threads: (26) 0.5 - 28 tpi
Metric Threads: (22) 1 - 15 mm
Module Threads: (21) 0.5 - 7.5
Diametral Threads: (20) 2 - 28 tpi
Longitudinal Threads: (32) 0.003 - 0.56 ipr
Cross Feeds: (32) 0.003 - 0.56 ipr
Leadscrew Diameter - Pitch: 2.2" - 2 tpi
Longitudinal Rapid Traverse: 157 ipm
Machine Weight: 24,640 lbs
Swing Over Bed: 35"
Swing Over Cross Slide: 24"
Spindle Center to Floor: 45"
Distance Between Centers: 39" / 59"
Max Turning Length: 39" / 59"
Bed Width: 27.75"
Spindle Bore and Nose: 9.44" / A1-20
Spindle Speeds: (12) 7 - 305 rpm
Spindle Motor: 30 hp
Compound Slide Swivel Angle: 90 degrees
Cross Slide Travel: 12"
Compound Slide Travel: 8"
Cross Slide Width: 13"
Taper Attachment Angle: 14 degrees
Inch Threads: (26) 0.5 - 28 tpi
Metric Threads: (22) 1 - 15 mm
Module Threads: (21) 0.5 - 7.5
Diametral Threads: (20) 2 - 28 tpi
Longitudinal Threads: (32) 0.003 - 0.56 ipr
Cross Feeds: (32) 0.003 - 0.56 ipr
Leadscrew Diameter - Pitch: 2.2" - 2 tpi
Longitudinal Rapid Traverse: 157 ipm
Machine Weight: 18,700 lbs
Swing Over Cross Slide: 24"
Spindle Center to Floor: 45"
Distance Between Centers: 39" / 59"
Max Turning Length: 39" / 59"
Bed Width: 27.75"
Spindle Bore and Nose: 9.44" / A1-20
Spindle Speeds: (12) 7 - 305 rpm
Spindle Motor: 30 hp
Compound Slide Swivel Angle: 90 degrees
Cross Slide Travel: 12"
Compound Slide Travel: 8"
Cross Slide Width: 13"
Taper Attachment Angle: 14 degrees
Inch Threads: (26) 0.5 - 28 tpi
Metric Threads: (22) 1 - 15 mm
Module Threads: (21) 0.5 - 7.5
Diametral Threads: (20) 2 - 28 tpi
Longitudinal Threads: (32) 0.003 - 0.56 ipr
Cross Feeds: (32) 0.003 - 0.56 ipr
Leadscrew Diameter - Pitch: 2.2" - 2 tpi
Longitudinal Rapid Traverse: 157 ipm
Machine Weight: 18,700 lbs